RedBoot(tm) bootstrap and debug environment [REDBOOT]
Non-certified release, version UNKNOWN - built 19:11:07, Feb 24 2010
Platform: GCT GSK7205 (GDM7205)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0xd0000000-0xd0800000, [0xd0008000-0xd0751000] available
FLASH: 0xc0000000 - 0xc0ffffff 4 x 0x8000 blocks 127 x 0x20000 blocks
== Executing boot script in 0.500 seconds - enter ^C to abort
RedBoot> fis unlock rootfs
... Unlocking from 0xc0160000-0xc01fffff: .....
RedBoot> fis load rootfs
RedBoot> chkcrc -c usbr
RedBoot> fis load linux
RedBoot> chkcrc -c usbr
RedBoot> exec -c "console=ttyS0,115200 root=/dev/mtdblock3 ro"
Using base address 0xd0600000 and length 0x00100000
Linux version 2.6.12-uc0 (bradchoi@linux) (gcc version 3.4.4) #876 Thu Mar 25 23:17:34 KST 2010
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Machine: Vincent7
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock3 ro
vector_phys_addr = d0001000
PID hash table entries: 64 (order: 6, 1024 bytes)
CLK_1X=60000000
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 8MB = 8MB total
Memory: 3404KB available (1152K code, 304K data, 496K init)
Calibrating delay loop... 79.87 BogoMIPS (lpj=399360)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Starting vpos on DSP core
net_device not found
net_device not found
net_device not found
net_device not found
net_device not found
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
ttyS0 at I/O 0xfc007500 (irq = 2) is a Vincent7 internal UART
ttyS1 at I/O 0xfc007540 (irq = 21) is a Vincent7 internal UART
io scheduler noop registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
GCT mobile WiMax driver version 0.1
physmap flash device: 4000000 at c0000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in phys_mapped_flash at offset 0xfe0000
7 RedBoot partitions found on MTD device phys_mapped_flash
Creating 7 MTD partitions on "phys_mapped_flash":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "param"
0x00060000-0x00160000 : "linux"
0x00160000-0x00200000 : "rootfs"
0x00200000-0x00fe0000 : "isofs"
0x00fe0000-0x00fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x00fff000-0x01000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
USB phy is probed to ULPI
udc_clkinit: prev GPIO_CD_CONFIG 0x1f changed to ULPIGCT USB Device Controller v5 0.4 beta (dma disabled)
M-WiMAX Network Adaptor, version: 0.4
Using default clock delay 35
i2c /dev entries driver
GPIO_CD_CONFIG error(0x9)
vincent7-sdio: probe of vincent7-sdio.0 failed with error -1
sdio_add_slave_function: sdio slave fn has wrong values. fn0, total_func_num0, fifo_size:0x640, RCV_BUF_SIZE:
NET: Registered protocol family 17
Empty flash at 0x0000fffc ends at 0x00010000
Empty flash at 0x0002fffc ends at 0x00030000
Empty flash at 0x0004fffc ends at 0x00050000
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 496K
Welcome to
V i n c e n t 7 u C l i n u x
For further information check:
www.uclinux.org/
CD Image Size: 12132352
Loading OMA DM management tree
Normal tree.
Model name: GSK7201
Manufacturere: GCT
WIMAX MAC: 00:21:07:xx:xx:xx
HIF: console /dev/usb0
Parameter block: version 2 in NVRAM NOR FLASH
)
